Ten Things To Consider Before Buying A Bird House
center>Ten Things To Consider When Purchasing A Bird House
2. Diameter Of Entrance Hole Most of our common hole-nesting birds can use an entrance hole 1-1/2 inches in diameter. This size also keeps out Starlings, another invasive species that takes over nest boxes from native species.
3. Inside Flooring Dimensions The inside dimensions of the box are important and should be at least 4 inches by 4 inches so that there is room for the young to develop.
4. Overall Height Of House The distance from the bottom of the entrance hole to the floor of the box should be at least 5 inches. This keeps the developing young well down in the box and away from predators that might approach the entrance hole.
5. Easy Access For Cleaning You must be able to open the box, either on the side, front, or top. This helps in two ways: to monitor the progress and health of the young; and to clean out the box at the end of the season.
6. Ventilation There must be holes or slits at the top of the box sides or along the top of the front of the box to let hot air out when the sun beats down on the box in summer.
7. Drain Holes The bottom of the box needs to have holes or cut off corners to allow any water to drain out of the box.
8. Mounting Check to see if there is some way that you can attach the box to a pole, such as holes or a bracket.
9. Wood Material Of Choice Be sure that the materials the box is made of are 3/4 inch thick wood or a similar material that will insulate the birds from cold and heat. The only exception to wood is Purple Martin Housing -- many are made out of Metal.
10. Roof Overhang The roof should overhang the entrance hole by 1 to 2 inches. This both shades the entrance hole and keeps the rain out.
Courtesy: Cedar Creek Woodshop
About the author: Here at Cedar Creek Woodshop we have been building and designing Outdoor Patio furniture, Bird Houses, Bird Feeders and More!! Come in and take a look around!!